Specifications

Parameter	High Speed Output (Max)	High Current Output (Max)
Voltage	50 V	50 V
Continuous Drain Current @ 50 V	2 A	50 A
Pulsed Current @ 50 V, 1 ms	8 A	100 A
Minimum Pulse	2 µs	500 µs
Rise Time	250 ns	4 µs
Fall Time	250 ns	4 µs
Delay	100 ns	5 µs

General

Parameter	Value
Polarity	Positive
Connectors (DC Power In)	XT90 male connector
Connectors (Output)	XT90 male connector
Output cabling	User-supplied, or use the wires shipped with the instrument
Power requirements (DC)	0 to 52 V, >50 A
Power requirements (AC)	100–240 V, 50–60 Hz
Dimensions (2U), W x H x D	17.25" x 3.47" x 14" (437.9 mm x 88.1 mm x 355.6 mm)
Chassis material	Steel
Temperature range	5 °C to 40 °C

Fuses

Fuse	Rating	Protects
Fast blow	2.5 A	High-speed test
Slow blow	50 A	High-current test

Note: the source document also lists a second set of values for Minimum Pulse, Rise Time, Fall Time, and Delay in its wire-connection diagrams (High Speed: Minimum Pulse 500 ns; High Current: Rise Time 35 µs, Fall Time 6 µs, Delay 45 µs) that differ from the primary Specifications table reproduced above. Both sets appear in the source as provided; confirm the applicable values with Microsanj if precise timing figures are required.